Gazebo is a powerful 3D simulation environment for autonomous robots that is particularly suitable for testing object-avoidance and computer vision. This page describes its use with SITL and a single vehicle. Gazebo can also be used with HITL and for multi-vehicle simulation.
Gazebo is often used with ROS, a toolkit/offboard API for automating vehicle control. If you plan to use PX4 with ROS you should follow the ROS Instructions to install both ROS and Gazebo (and thereby avoid installation conflicts).
See Simulation for general information about simulators, the simulation environment, and simulation configuration (e.g. supported vehicles).
Gazebo 9 setup is included in our standard build instructions:
- macOS: Development Environment on Mac
- Linux: Development Environment on Ubuntu LTS / Debian Linux > Gazebo, JMAVSim and NuttX (Pixhawk) Targets
- Windows: Not supported.
Additional installation instructions can be found on gazebosim.org.
Run a simulation by starting PX4 SITL and gazebo with the airframe configuration to load (multicopters, planes, VTOL, optical flow and multi-vehicle simulations are supported).
The easiest way to do this is to open a terminal in the root directory of the PX4 Firmware repository and call
make for the desired target.
For example, to start a quadrotor simulation (the default):
cd /path/to/Firmware make px4_sitl gazebo
The supported vehicles and
make commands are listed below (click links to see vehicle images).
For the full list of build targets run
make px4_sitl list_vmd_make_targets(and filter on those that start with
|Quadrotor with Optical Flow||
|3DR Solo (Quadrotor)||
|Typhoon H480 (Hexrotor) (supports video streaming)||
|Ackerman vehicle (UGV/Rover)||
|HippoCampus TUHH (UUV: Unmanned Underwater Vehicle)||
|Boat (USV: Unmanned Surface Vehicle)||
The Installing Files and Code guide is a useful reference if there are build errors.
The commands above launch a single vehicle with the full UI. Other options include:
- Starting PX4 and Gazebo separately so that you can keep Gazebo running and only re-launch PX4 when needed (quicker than restarting both).
- Run the simulation in Headless Mode, which does not start the Gazebo UI (this uses fewer resources and is much faster).
make commands above first build PX4, and then run it along with the Gazebo simulator.
Once PX4 has started it will launch the PX4 shell as shown below.
______ __ __ ___ | ___ \ \ \ / / / | | |_/ / \ V / / /| | | __/ / \ / /_| | | | / /^\ \ \___ | \_| \/ \/ |_/ px4 starting. INFO [px4] Calling startup script: /bin/sh etc/init.d-posix/rcS 0 INFO [param] selected parameter default file eeprom/parameters_10016 [param] Loaded: eeprom/parameters_10016 INFO [dataman] Unknown restart, data manager file './dataman' size is 11798680 bytes INFO [simulator] Waiting for simulator to connect on TCP port 4560 Gazebo multi-robot simulator, version 9.0.0 Copyright (C) 2012 Open Source Robotics Foundation. Released under the Apache 2 License. http://gazebosim.org ... INFO [ecl/EKF] 5188000: commencing GPS fusion
The console will print out status as PX4 loads the airframe-specific initialisation and parameter files, waits for (and connects to) the simulator.
Once there is an INFO print that [ecl/EKF] is
commencing GPS fusion the vehicle is ready to arm.
Right-clicking the quadrotor model allows to enable follow mode from the context menu, which is handy to keep it in view.
You can bring it into the air by typing:
pxh> commander takeoff
Gazebo can be run in a headless mode in which the Gazebo UI is not launched. This starts up more quickly and uses less system resources (i.e. it is a more "lightweight" way to run the simulation).
Simply prefix the normal
make command with
HEADLESS=1 as shown:
HEADLESS=1 make px4_sitl gazebo_plane
The default takeoff location in SITL Gazebo can be overridden using environment variables.
The variables to set are:
export PX4_HOME_LAT=28.452386 export PX4_HOME_LON=-13.867138 export PX4_HOME_ALT=28.5 make px4_sitl gazebo
The simulation speed can be increased or decreased with respect to realtime using the environment variable
export PX4_SIM_SPEED_FACTOR=2 make px4_sitl_default gazebo
For more information see: Simulation > Run Simulation Faster than Realtime.
Joystick and thumb-joystick support are supported through QGroundControl (setup instructions here).
The current default world is PX4/sitl_gazebo/worlds/iris.world), which uses a heightmap as ground.
This can cause difficulty when using a distance sensor.
If there are unexpected results we recommend you change the model in iris.model from
Gazebo can simulate GPS noise that is similar to that typically found in real systems (otherwise reported GPS values will be noise-free/perfect). This is useful when working on applications that might be impacted by GPS noise - e.g. precision positioning.
GPS noise is enabled if the target vehicle's SDF file contains a value for the
gpsNoise element (i.e. it has the line:
It is enabled by default in many vehicle SDF files: solo.sdf, iris.sdf, standard_vtol.sdf, delta_wing.sdf, plane.sdf, typhoon_h480, tailsitter.sdf.
To enable/disable GPS noise:
- Build any gazebo target in order to generate SDF files (for all vehicles).
make px4_sitl gazebo_iris
The SDF files are not overwritten on subsequent builds.
- Open the SDF file for your target vehicle (e.g. ./Tools/sitl_gazebo/models/iris/iris.sdf).
- Search for the
<plugin name='gps_plugin' filename='libgazebo_gps_plugin.so'> <robotNamespace/> <gpsNoise>true</gpsNoise> </plugin>
- If it is present, GPS is enabled.
You can disable it by deleting the line:
- If it is not preset GPS is disabled.
You can enable it by adding the
gpsNoiseelement to the
gps_pluginsection (as shown above).
- If it is present, GPS is enabled. You can disable it by deleting the line:
The next time you build/restart Gazebo it will use the new GPS noise setting.
You can load any of the worlds by specifying them as the final option in the PX4 configuration target. For example, to load the warehouse world, you can append it as shown:
make px4_sitl_default gazebo_plane_cam__warehouse
There are two underscores after the model (
plane_cam) indicating that the default debugger is used (none). See Building the Code > PX4 Make Build Targets.
You can also specify the full path to a world to load using the
PX4_SITL_WORLD environment variable.
This is useful if testing a new world that is not yet included with PX4.
For extended development sessions it might be more convenient to start Gazebo and PX4 separately or even from within an IDE.
In addition to the existing cmake targets that run
sitl_run.sh with parameters for px4 to load the correct model it creates a launcher targets named
px4_<mode> that is a thin wrapper around original sitl px4 app.
This thin wrapper simply embeds app arguments like current working directories and the path to the model file.
To start Gazebo and PX4 separately:
- Run gazebo (or any other sim) server and client viewers via the terminal specifing an
make px4_sitl gazebo___ide
make px4_sitl gazebo_iris_ide
- In your IDE select
px4_<mode>target you want to debug (e.g.
- Start the debug session directly from IDE
This approach significantly reduces the debug cycle time because simulator (e.g. Gazebo) is always running in background and you only re-run the px4 process which is very light.
The Gazebo survey camera simulates a MAVLink camera that captures geotagged JPEG images and sends camera capture information to a connected ground station. The camera also supports video streaming. It can be used to test camera capture, in particular within survey missions.
The camera emits the CAMERA_IMAGE_CAPTURED message every time an image is captured. The captured images are saved to: Firmware/build/px4sitle_default/tmp/frames/DSC_n.jpg (where n starts as 00000 and is iterated by one on each capture).
To simulate a plane with this camera:
make px4_sitl_default gazebo_plane_cam
The camera also supports/responds to the following MAVLink commands: MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS, MAV_CMD_REQUEST_STORAGE_INFORMATION, MAV_CMD_REQUEST_CAMERA_SETTINGS, MAV_CMD_REQUEST_CAMERA_INFORMATION, MAV_CMD_RESET_CAMERA_SETTINGS, MAV_CMD_STORAGE_FORMAT, MAV_CMD_SET_CAMERA_ZOOM, MAV_CMD_IMAGE_START_CAPTURE, MAV_CMD_IMAGE_STOP_CAPTURE, MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION, MAV_CMD_REQUEST_VIDEO_STREAM_STATUS, MAV_CMD_SET_CAMERA_MODE.
The simulated camera is implemented in PX4/sitl_gazebo/src/gazebo_geotagged_images_plugin.cpp.
if750a target has a parachute attached to the vehicle.
To simulate the vehicle, run the following command:
make px4_sitl gazebo_if750a
To put the vehicle into flight termination state, you can force it to fail a safety check that has flight termination set as the failsafe action. For example, you could do this by forcing a Geofence violation.
For more information see:
PX4 SITL for Gazebo supports UDP video streaming from a Gazebo camera sensor attached to a vehicle model. When streaming is enabled, you can connect to this stream from QGroundControl (on UDP port 5600) and view video of the Gazebo environment from the simulated vehicle - just as you would from a real camera. The video is streamed using a gstreamer pipeline and can be enabled/disabled using a button in the Gazebo UI.
The Gazebo camera sensor is supported/enabled on the following frames:
Gstreamer 1.0 is required for video streaming. The required dependencies should already have been installed when you set up Gazebo (they are included in the standard PX4 installation scripts/instructions for macOS and Ubuntu Linux).
FYI only, the dependencies include:
Video streaming is automatically started when supported by the target vehicle. For example, to start streaming video on the Typhoon H480:
make px4_sitl gazebo_typhoon_h480
Streaming can be paused/restarted using the Gazebo UI Video ON/OFF button..
The easiest way to view the SITL/Gazebo camera video stream is in QGroundControl. Simply open Application Settings > General and set Video Source to UDP h.264 Video Stream and UDP Port to 5600:
The video from Gazebo should then display in QGroundControl just as it would from a real camera.
The Typhoon world is not very interesting.
It is also possible to view the video using the Gstreamer Pipeline. Simply enter the following terminal command:
gst-launch-1.0 -v udpsrc port=5600 caps='application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264' \ ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink fps-update-interval=1000 sync=false
To extend or customize the simulation interface, edit the files in the
The code is available on the sitl_gazebo repository on Github.
The build system enforces the correct GIT submodules, including the simulator. It will not overwrite changes in files in the directory.